Fein 7 205 47 Instrucciones De Uso página 14

OBJ_BUCH-0000000134-002.book Page 14 Wednesday, September 5, 2018 11:17 AM
en
14
Removing the drill chuck (figure 4).
Insert a hex key into the drill chuck and
tighten the drill chuck.
Unscrew the drill chuck using the hex key and
the open-end wrench (size 17 mm).
Mounting the drill chuck (figure 5).
Mount the drill chuck in reverse order.
Tighten the drill chuck using a hex key and
the open-end wrench (size 17 mm) (tighten-
ing torque: 443 lbf in, 50 Nm). 2.
2.