INSTRUCTION MANUAL
EN
PORTABLE AIR CONDITIONER KLC7000
GENERAL DESCRIPTION (drawing 1)
Front
1. Control panel
2. Top cover
3. Louvres
4. Handles
5. Front cover
6. Rear cover
7. Base
8. Wheels
INTENDED USE
The KLC7000 air conditioner is designed to improve thermal comfort in living spaces.
The air can be cooled or dehumidified with it. It will also work as a standard fan.
INSTALLATION
Choosing the place for installation – drawing 2.
The device must be placed vertically on a flat surface, in a dry and spacious place. Leave at
least 50 cm of free space round the unit.
The unit must be installed in accordance with the national regulations for electrical
installations.
Before connecting to the mains, make sure that the mains-current (voltage) parameters
correspond to those specified on the device.
The mains plug of the device should be fully plugged into the mains socket.
Do not use extension cords or splitters to connect the mains cable of the device.
If the device will not be used for an extended period of time, unplug the power cord from
the wall outlet.
If the unit has not been used for a long time, check that the air inlets and outlets are not
blocked before restarting the unit.
Installation
Attach the connector (16) to one end of the outlet pipe and attach the other end of the
pipe to the outlet (11) – drawing 3.
The connector (16) can be mounted on the mounting panel (17) and then placed in the
window – drawing 4.
The length of the panel (17) is adjustable.
•
20
EN
Rear
9. Filter I
10. Water drain - continuous
11. Warm-air outlet
12. Filter II
13. Water drain - manual
Additional accessories
14. Remote control
15. Outlet pipe
16. Connection adaptor
17. Mounting panel (2 parts)