Página 1
Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: For easy installation of your Delta faucet you will need: ・To READ ALL the instructions completely before beginning.
Página 2
Install Pop-Up Assembly SHUT OFF WATER SUPPLIES. Apply silicone to underside of flange (1). Remove stopper (1) and flange (2). Remove old faucet. Place gasket (1) on bottom of new Insert body (2) into sink. Screw flange onto Screw nut (3) all the way down. faucet.
Página 3
FLUSH SYSTEM/CHECK FOR LEAKS. CONNECT TO WATER SUPPLIES. Remove aerator (1) and turn faucet handles (2) all the way on. Turn on hot (HOOK-UPS NOT PROVIDED). and cold water supplies (3) and flush water lines for one minute. Determine which type of connection you will be making.
Página 4
Maintenance If faucet exhibits very low flow: A. Remove and clean Aerator (3) (page 5), or B. Clean Seats and Springs (2) of any debris. SHUT OFF WATER SUPPLIES *Install stems (1) correctly for proper handle rotation: When replacing a part, follow the illustrated instructions Note: The stops (4) must point to the center of the faucet for provided on the back of the Repair Part Kit.
Página 5
Specify Finish ▲ Especifíque el Acabado Précisez le Fini RP47831▲ Hot & Cold Lever Handles w/Set Screws Manijas en palanca de agua fría y caliente con tornillos de ajuste Manettes-leviers d’eau chaude et d’eau froide avec vis de calage RP20547 Retention Screws Note: These screws must be installed into the hole in the top of the stem unit assemblies (1) when using...
Página 6
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.