Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for part AXGM-08
GM Data Interface
2005-2006
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake,
reverse, speed sense)
• Retains chimes
• Pre-wired AXSWC harness (AXSWC sold
separately)
INTERFACE COMPONENTS
• AXGM-08 interface • AXGM-08 harness
• 16-pin harness with stripped leads
CHEVROLET
Equinox
2005-2006
Axxess Integrate
AXGM-08
INTERFACE FEATURES
• Retains OnStar / OE Bluetooth
• Adjustable OnStar level
• Designed for amplified models
• Retains balance and fade
• AXUSB-CBL (sold separately) updatable
APPLICATIONS
PONTIAC
Torrent
axxessinterfaces.com
Connections to be made .........................................2
Installing the AXGM-08 ..........................................3
Initializing the AXGM-08 ........................................3
Adjusting the AXGM-08 ..........................................3
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
• Small flat-blade screwdriver
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
2006
on position, or while the vehicle is running.
•
metraonline.com
Table of Contents
All accessories, switches, climate controls panels, and
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Axxess AXGM-08
Resumen de contenidos para Axxess AXGM-08
- Página 1 • AXUSB-CBL (sold separately) updatable • Small flat-blade screwdriver • Pre-wired AXSWC harness (AXSWC sold separately) INTERFACE COMPONENTS • AXGM-08 interface • AXGM-08 harness • 16-pin harness with stripped leads APPLICATIONS CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling...
- Página 2 • Connect the Blue/White wire to the amp turn on wire. This wire must be connected to hear sound from the factory amplifier. From the AXGM-08 harness to the aftermarket radio: • If the aftermarket radio has an illumination wire, connect the Orange/White •...
- Página 3 • Connect the AXGM-08 harness to the wiring harness in the vehicle. • Once at a desired level, audio level adjustment is complete. Note: If using the AXSWC, connect it after you initialize and test the AXGM-08, Chime level adjustment: with the key in the off position.
- Página 4 Installation instructions for part AXGM-08 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Página 5 (se vende por separado) • Arnés AXSWC precableado (el AXSWC se vende por separado) COMPONENTES DE LA INTERFASE • Interfase AXGM-08 • Arnés AXGM-08 • Arnés de 16 pins con conectores pelados ¡PRECAUCIÓN! Todos los accesorios, interruptores, paneles de con-...
- Página 6 • Conecte el cable azul/blanco con el cable de encendido del amplificador. Este cable debe estar conectado para escuchar sonido del amplificador de fábrica. Del arnés AXGM-08 al radio de mercado secundario: • Si el radio de mercado secundario tiene un cable de iluminación, conecte el •...
- Página 7 • Con el vehículo y el radio encendidos, aumente el volumen hasta 3/4 de su totalidad . • Conecte el arnés de 16 pins con conectores pelados, y el arnés AXGM-08, a la • Con un pequeño destornillador de cabeza plana, ajuste el potenciómetro interfase.
- Página 8 Instrucciones de instalación para la pieza AXGM-08 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...