Axxess AXDI-MB1 Instrucciones De Instalación

Mercedes Data Interface 2001-up
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, and V.S.S)
• Pre-wired AXSWC harness (AXSWC sold separately)
• Designed for non-amplified models, or when bypassing a factory amp
• Retains balance and fade
• Micro "B" USB updatable
• AXDI-MB1 interface • LD-AX-XSVI-MB1 harness • LD-AX-XSVI-MB2 harness
LD-AX-XSVI-MB1 Harness:
C Class 2001-2004
CLK Class 2004
CLK500 2003
CLK55 AMG 2003
Axxess Integrate
Installation instructions for part AXDI-MB1
AXDI-MB1
INTERFACE FEATURES
INTERFACE COMPONENTS
APPLICATIONS
LD-AX-XSVI-MB2 Harness:
C Class 2005-2011
CLK Class 2005-2009
E Class 2010-up
G Class 2007-2012
axxessinterfaces.com
GLK Class 2010-2012
R Class 2006-2011
SLK Class 2005-2011
Sprinter 2010-up
•
metraonline.com
TABLE OF CONTENTS
Connections to be made ................................................... 2
Installing the AXDI-MB1 ................................................... 3
Initializing the AXDI-MB1 ................................................. 3
TOOLS REQUIRED
• Cutting tool • Tape • Crimping tool
• Connectors (i.e. butt-connectors, bell caps, etc.)
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION