Allen home ACMF-014-2875 Instrucciones De Montaje página 10

Voyager 75 with Soundbar
Soundbar Operation
Soundbar Specifications
Rated Power
Frequency Range
Audio Inputs
Signal to Noise Ratio
Degree of Separation
Speaker Unit
Dimensions
Weight
Soundbar Setup and Operation
1. Connect the RIGHT speaker
cable to the speaker input on
the back of the main speaker.
2. Connect your A/V device to
the main speaker using either
the supplied RED/WHITE RCA
cables (or a user-supplied
optical cable).
When using the RED/WHITE
RCA cables, ensure that they
are plugged into the matching
color inputs both on the main
speaker and your A/V Device.
If not using a TV, cable box,
or DVD/BlueRay player, you
can connect a mobile device
using a 3.5mm audio cable,
OR connect a device via
Bluetooth OR use a USB flash
drive that contains MP3 files.
10
15W x 2 + 30W x 1
45Hz ~ 22kHz
AUX x 1
Optical x 1
RCA x 1
Bluetooth x 1
USB x 1
≥75dB
≥45dB
Bass: 4 in / 8 Ω x 1
Full frequency: 2.5 in / 8 Ω x 4
High frequency: 1 in / 13 core / 4 Ω x 2
Main speaker: 14.86 in L x 3 in W x 20.25 in H
(377.5mm L x 76mm W x 512mm H)
Subwoofer: 3.5 in L x 3 in W x 20.25 H
(87mm L x 76mm W x 512 mm H
11.3 lb (5.1 kg)
3. Connect the power adapter
cable to the [DC IN] input on
the back of the main speaker.
After all other connections are
complete, plug in the power
adapter to a wall socket.
4. Press POWER either on the
main control panel or on the
remote control.
5. Use the main control panel or
remote control to choose the
appropriate input method.
If connecting via Bluetooth,
press [BT] on either the
main control panel or remote
control, and then pair your
device with the soundbar.
NOTE: To switch between
multiple Bluetooth devices,
you will need to disconnect
© 2016 Allen Home. All Rights Reserved
ACMF-014-2875_v1.4_ 20161109
ASSEMBLY INSTRUCTIONS
the first device before another
device can be used.
6. If the sound source is a TV,
DVD, or BlueRay player, refer
to the device instructions to
select the device Audio output
between RCA, Optical, or
Bluetooth.
7. When proper sound playback
has been established, adjust
the volume and subwoofer/
bass level to your taste.
NOTE: To activate the preset
sound balancing feature,
press [3D] on the remote
control.
The soundbar indicator
panel display will fade out
approximately 15 seconds
after the last input.