Bond HYFP30105-18 Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
4 4 .
Turn the cylinder valve on the tank clockwise to
close the propane tank. Attach the preassembled
regulator from the body (C) to the cylinder valve
by turning the regulator coupling nut clockwise.
Make sure it is fastened securely and tighten
connections by hand only.
5 . Once the tank is attached to the regulator,
make sure the propane gas tank sits on the
metal stand inside body (C) completely. Turn the
preassembled wing screw on the outer part of
metal stand clockwise to secure the propane gas
tank tightly.
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
1-866-771-2663 | Page 7
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal