Madas FMC DN15 Manual De Instrucciones página 12

2.0 - TECHNICAL DATA
• Use
• Ambient temperature (TS)
• Maximum operating pressure
• Mechanical resistance
• Rp threaded connections
• NPT threaded connections
• Filter element
• In compliance with
2.1 - MODEL IDENTIFICATION
FMC:
Compact gas filter - P.max = 2 or 6 bar - Rp DN 15 - Rp DN 20 - Rp DN 25
3.0 - COMMISSIONING THE DEVICE
3.1 - OPERATIONS PRIOR TO INSTALLATION
• It is necessary to close the gas upstream of the device prior to installation;
• Make sure that the line pressure DOES NOT EXCEED the maximum pressure declared on the product label;
• Protective caps (if any) must be removed prior to installation;
• The pipes and inside of the device must be clear of any foreign bodies;
• Make sure that the pipe thread is not too long, to prevent damaging the body of the device when screwing it on;
• Consider the clearance requirements to replace the filter element;
: non-aggressive gases of the three families (dry gases)
: -40 ÷ +70 °C
: 2 or 6 bar (see product label)
: Group 2 (according to EN 13611)
: (DN 15 - DN 20 - DN 25) according to EN 10226
: request feasibility
: Filtering 10-20-50 µm (see product label)
: Regulation (EU) 2016/426 (Appliances burning gaseous fuels)
PED Directive 2014/68/EU
12