Publicidad
Idiomas disponibles
Idiomas disponibles
3) Mount the TV mounting bracket on the back of the TV as close as possible to the centre [A]
and aligned with the top of the TV-screen [B].Depending on the TV screen, use the correct
bolts [g], [j],[k], [m] or [n], together with the correct washers [h]. Make sure that the
threaded inserts of the TV are deep enough to tighten the bolts without damaging the TV.
When necessary (e.g. curved TV-back, bolt too long), use the included plastic spacers [i].
4) Hook the TV with the TV rails [b] over the wall plate [a].
When a 5% downward inclination of the TV screen is desired, mount 2 TV rail hooks [o] on
each TV rail [b] using bolts [p] and nuts [q].
5) Slide the safety bar [f] into the gap at the bottom of the TV rails [b] and the wall plate [a].
A padlock (not incl.) can be inserted in the foreseen opening [r] in the safety bar [f] to
increase safety and prevent malicious removal of the TV screen.
6. Technical specifications
LCD/plasma size
mounting angle
dimensions
Use this device with original accessories only. Velleman nv cannot be held responsible in
the event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Components nv. All worldwide rights
reserved. This manual, and when applicable the software described in it, are copyrighted.
No part of this manual or the described software may be copied, reproduced, translated or reduced
to any electronic medium or otherwise without the prior written consent of the copyright holder. For
personal back-up purposes, one copy of the included software is permitted.
07/01/2009
max. load
TV to wall
weight
WB013
30"-65" / 76-165cm
75kg / 165lbs
±40mm (0°)
0° or 5° down
48 x 90.5cm
6.7kg
5
© 2008 Velleman Components nv
Publicidad
