Publicidad
Idiomas disponibles
Idiomas disponibles
immediately if there is considerable
vibration or if other defects are
detected. If this condition occurs,
check the machine to determine the
cause.
- Do not use separate reducing
bushings or adapters to adapt large
hole abrasive wheels.
- For tools intended to be fitted with
threaded hole wheel, ensure that the
thread in the wheel is long enough
to accept the spindle length.
- Check that the work piece is
properly supported.
- Do not use cutting off wheel for
side grinding.
- Ensure that sparks resulting from
use do not create a hazard e.g. do
not hit persons, or ignite flammable
substances.
- Ensure that ventilation openings
are kept clear when working in
dusty conditions. If it should become
necessary
to
disconnect the tool from the mains
supply (use non metallic objects)
and avoid damaging internal parts.
- Always use eye and ear protection.
Other personal protective equipment
such as dust mask, gloves, helmet
and apron should be worn.
- The wheel continues to rotate after
the tool is switched off.
clear
dust,
first
- Never use the tool without the
guard in place, the wheel guard
must be fitted on the tool so that
the closed side of the guard always
points toward the operator.
4. Environmental Protection
CAUTION! This product has been
marked with a symbol
relating to removing electric
and electronic waste. This
means that this product
shall not be discarded with
household waste but that it shall
be returned to a collection system
which conforms to the European
WEEE Directive. Contact your local
authorities or stocks for advice on
recycling. It will then be recycled or
dismantled in order to reduce the
impact on the environment. Electric
and electronic equipment can be
hazardous for the environment and
for human health since they contain
hazardous substances.
5. Tool Specifications
TECHNICAL CHARACTERISTICS
Voltage
Power
Speed
Cord
Weight
Grinding Disc
Diameter
220V / 50Hz
2000W
8400rpm
2m
12.1Lbs
7"(180mm)
9
Publicidad
