Broan RM326H Manual Del Usuario página 4

MOUNTING
PLATE
BLOWERS
6. Connect duct to rough-in plate. Use duct tape to make all
joints secure and air tight.
HEX NUTS (8)
ROUGH-IN
PLATE
SLOTS
TABS
BLOWER /
MOUNTING
PLATE
ASSEMBLY
HEX NUTS (2)
7. Attach BLOWERS to MOUNTING PLATE with (8) 10 -24 HEX
NUTS.
8. Engage two TABS on BLOWER / MOUNTING PLATE
ASSEMBLY into two SLOTS in ROUGH-IN PLATE. Secure
blower / mounting plate assembly to THREADED STUDS on
rough-in plate with (2) 10-24 HEX NUTS.
9. Plug BLOWER POWER CORD and ROUGH-IN PLATE
POWER CORD into HOOD RECEPTACLES.
10. Wrap wires with wire tie (provided).
MODEL RM326H
Page 4
STUDS
HOOD
RECEPTACLE
ROUGH-IN
PLATE
POWER
CORD
HOOD
RECEPTACLE
BLOWER
POWER
CORD