Canon imageRUNNER ADVANCE 4251i Guía De Usuario página 43

Storing Scanned Data
This section describes the fl ow of basic Scan and Store operations. It also describes an example of how to store
scanned data in a mail box.
1
Placing Originals
●
Place the original on the feeder or
the platen glass.
2
Selecting Function
●
Select [Scan and Store] from the
Main Menu screen.
3
Select Storage
●
Specify the mail box that you
want to store the fi le in.
•
Select the desired mail box.
4
Start Scanning
●
After specifying the settings,
press .
•
If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/PIN). If the
Copy Card Reader-F1 is attached, fi rst insert a control card.
•
If a login service, such as Department ID Management or SSO-H has been set, press
2
Placing originals in the feeder
•
Adjust the slide guides to fi t the size of your
originals. Neatly place your originals with the
side to be copied face up.
•
Press [Scan and Store].
•
Press [Scan].
•
Press .
(Log In/Out) to log out.
Placing originals on the platen glass
•
Open the feeder.
•
Place your originals face down.
•
Select [Mail Box] from the screen where you can
select the type of storage location.
As an example, this procedure uses a mail box to store
scanned data.
You can set various scan functions. For more
information, see e-Manual > Scan and Store.
Flow of Basic Operations 41