Canon imageRUNNER ADVANCE 4251i Guía De Usuario página 52

Replacing the Toner Cartridge/Waste Toner Container
Replacing the Toner Cartridge
When there is only a small amount of toner remaining
inside the machine, the message <Replace toner
cartridge.> appears on the touch panel display. You can
continue printing, but at this time you should purchase a
new toner cartridge to have it available when needed.
When the Black toner or all of the toners run out
completely and prints can no longer be made, a screen
with instructions on how to replace the toner cartridge
appears on the touch panel display. Follow the procedure
described below to replace the toner cartridge.
If you press [Close], you can continue operations, such as
setting modes and scanning originals, even if you do not
replace the toner cartridge immediately.
•
Do not burn or throw used toner cartridges into
open fl ames, as this may cause the toner to ignite,
resulting in burns or a fi re.
•
If you accidentally spill or scatter toner, carefully
wipe up the loose toner with a damp, soft cloth and
avoid inhaling any toner dust. Do not use a vacuum
cleaner that is not equipped with safety measures
to prevent dust explosions to clean up loose toner.
Doing so may cause damage to the vacuum cleaner
or result in a dust explosion due to static discharge.
•
Keep toner out of the reach of small children.
•
If toner is ingested, consult a physician immediately.
•
If toner gets onto your hands or clothing, wash
it off immediately with cold water. Washing it off
with warm water will set the toner, and make it
impossible to remove the toner stains.
50 Routine Maintenance
IMPORTANT
•
Use only toner cartridges intended for use with this
machine.
•
For information on the supported Canon genuine
toner, see "Consumables, " on p. 55.
•
Do not replace toner cartridges until the message
prompting you to do so appears.
•
Do not attempt to replace the toner cartridge while the
machine is printing.
NOTE
•
When the message <Replace toner cartridge.> appears,
approximately 2,000 pages can be printed.
•
Complete instructions on how to replace the toner
cartridge can be accessed by pressing [Previous] or
[Next] on the touch panel display.
•
If toner runs out during a print job, the remaining prints
are made after you replace the toner cartridge.
•
After replacing toner cartridges, if printed colours
are diff erent from the colours printed before you
replaced the toner cartridges, perform an [Auto Adjust
Gradation] in [Adjustment/Maintenance] (Settings/
Registration). (See e-Manual > Settings/Registration.)
1
Remove the toner cartridge.
1. Open the toner replacement cover.
2. Pull out the toner cartridge.
Pull the toner cartridge out halfway, and then remove it
completely while supporting
it and keeping it straight with your other hand from
underneath.
Do not burn or throw used toner cartridges into open
fl ames, as this may cause the toner remaining inside
the cartridges to ignite, resulting in burns or a fi re.
IMPORTANT
Never touch the tip of the toner cartridge or subject
it to shock by hitting it. Doing so may cause the toner
cartridge to leak.
3