Whispbar K391W Instrucciones De Montaje página 6

EN
Fitting Kit
K391W
Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
Refit locking screw so that it goes through
the hole in the clamp. Do not begin to
tighten the locking screw.
It is important to put the pads in the correct
position on the vehicle.
Letters refer to the pad part numbers and
position.
Pad Part Number:
A = 11-04-250
B = 11-04-251
6