Belkin OmniView PRO Serie Manual Del Usuario página 16

F1D116_OSD_AM_man.qxd 4/20/00
Usage
On-Screen Display Menu Control:
To enable On-Screen Display, press [SCROLL LOCK] [SCROLL LOCK] [SPACEBAR].
Immediately, the OSD overlay screen appears. This screen is generated by the
OmniView
The main OSD screen menu is
shown on the right. It shows the
currently selected BANK. If you
have only one OmniView
it will say "BANK 0".
The current selected port
is shown in RED.
A "✹" indicates that the
computer connected to
that port is powered up.
• You can navigate through the
active ports by using the arrow
keys. The OSD menu
will only allow you to move to
active ports.
NOTE: If a computer is connected and is powered up, but the OSD menu does
not display a "✹", you will have to RESET the OmniView™ PRO to re-detect the
powered computers. This is done by simultaneously pressing the BANK/SCAN
and CHANNEL buttons on the front panel.
• Pressing the [INSERT] key allows you to rename the port. Press [ENTER] to complete.
• Pressing the [ESC] key exits the current screen.
• To view a different BANK, pressing the [PAGE UP] key goes to a previous BANK, while the [PAGE DOWN] key
brings you to the next BANK.
• Once you have selected a computer on the menu, press [ENTER] to switch to that port.
• Pressing the [TAB] key opens up the Function menu. In this menu, you can select the
DISPLAY TIME.
• [SCROLL LOCK] [SCROLL LOCK] [DEL] erases all of the names stored in the OmniView
names default back to "Channel 1", "Channel 2" etc... You must wait 30 seconds in order for the memory to be
reinitialized.
4:07 PM Page 14
(continued)
Enable the On-Screen Display Menu
™ PRO, and does not affect your computers or running software in any way.
™ PRO,
Currently
selected
Port is in
RED
Currently
selected Bank
Address
Belkin: F1D116-OSD
✹
1. WIN98
✹
2. NT SERVER
✹
3. MAC OS8
✹
4. NET SRVR
✹
5. UNIX SRVR
6. CHANNEL 6
7. CHANNEL 7
8. CHANNEL 8
BANK 0
(TAB): FUNCTION / HELP
:PgUp : PgDn
PRO's memory. The
™
14
"✹"
A indicates
"✹"
PC is powered
SCAN TIME and the