Publicidad
Idiomas disponibles
Idiomas disponibles
Impact Stop Switch
Operate the impact stop switch 5 only
when at a standstill.
Set the impact stop switch 5 to the desired posi-
tion:
Drilling
Hammer drilling
Hammer
HDBL family has no function without
rotation percussion
Right Rotation
Turn the rotational direc-
tion switch through to
the left stop (normal op-
eration: drilling, screw-
driving, etc.).
Left Rotation
Press the rotational di-
rection switch through to
the right stop (for loos-
ening and unscrewing
screws and nuts).
ENGLISH
23
Screwdriving
The machine is also suitable for occasional
screwdriving applications, however, not for
screwdriving applications with extreme re-
ductions of speed at which the overload
clutch frequently responds.
For screwdriving, the universal bit holder with
SDS-plus shank (accessory) must be used.
– Set the impact stop switch 5 to "Drill".
– Set the direction of rotation to right-hand rota-
tion.
– Regulate the speed with the On/Off switc h 6.
Maintenance and Cleaning
Before any work on the machine itself, re-
move the battery.
For safe and proper working, always keep
the machine and the ventilation slots clean.
Keep the tool holder clean at all times.
Due to wear of the battery locking latches or in-
complete inserting of the battery 8 into the battery
port, the battery can drop into the auxiliary
hooks 12. In case the auxiliary hooks 12 of the
machine or the battery are damaged, neither ma-
chine nor battery may be used further, but are to
be sent to an authorised service centre for Stayer
power tools
Changing the Dust Protection Cap
A damaged dust protection cap should be
changed immediately. We recommend having
this carried out by an after-sales service.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Stayer power tools.
In all correspondence and spare parts orders,
please always include order number given on
the nameplate of the machine.
23
Publicidad
