Publicidad
SAFETY INFORMATION FOR FILTER
Read, understand, and follow all safety information contained in these
instructions prior to installation and use. Retain these instructions for
future reference.
Intended use:
Delta
system model professional water systems are intended for use in
®
filtering drinking water in homes and has not been evaluated for other uses.
The system is typically installed under a sink where fi ltered drinking water
is desired, and must be installed, operated and maintained as specified in
the installation and use instructions.
EXPLANATION OF SIGNAL WORD CONSEQUENCES
WARNING
Notice
To reduce the risk associated with ingestion of contaminants:
• Do not use with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.
To reduce the risk associated with a hazardous voltage:
• Do not install near electric wiring or piping which may be in the path of
a drilling tool when selecting the position to mount the filter bracket.
To reduce the risk associated with choking:
• Do not allow children under 3 years of age to have access to small
parts during the installation of this product.
To reduce the risk of physical injury:
• Depressurize system as shown in manual prior to cartridge removal.
Indicates a potentially hazardous situation,
which, if not avoided, could result in death
or serious injury and/or property damage.
Indicates a potentially hazardous situation,
which, if not avoided, may result in
property damage.
WARNING
To reduce the risk associated with property damage due to
water leakage or flooding:
• Read and follow instructions before installation and use of
this system;
• Comply with all state or local plumbing codes.
• Install on cold water lines only.
• Protect filter from freezing. Drain filter when room temperature
drops below 40°F (4.4°C). Do not install systems in areas where
ambient temperatures may go above 110° F (43.3° C).
• Do not install if water pressure exceeds 125 psi (862 kPa). If your
water pressure exceeds 80 psi, you must install a pressure limiting
valve. Contact a plumbing professional if you are uncertain how to
check your water pressure.
• Do not install where water hammer conditions may occur. If water
hammer conditions exist you must install a water hammer arrester.
Contact a plumbing professional if you are uncertain how to check
for this condition.
• Do not install on hot water supply lines. The maximum operating
water temperature of this filter system is 100°F (38°C).
• Where a backflow prevention device is installed on a water system,
a device for controlling pressure due to thermal expansion must be
installed. Contact a plumbing professional if you are uncertain how
to select/install/maintain a thermal expansion device.
• Where a booster pump is installed on a water system, you must
maintain and inspect the attached pressure switch regularly in
accordance with the booster pump manufacturer's instructions.
Contact a plumbing professional if you are uncertain how to
maintain your booster pump system.
• Where a booster pump is installed on a water system, you must
install an appropriate pressure relief valve. Pressure relief valve
must be maintained and inspected every 6 months. Contact a
plumbing professional if you are uncertain how select/install/
maintain a pressure relief valve.
• Where a booster pump is installed on a water system, you must
install an appropriate pressure regulating valve and regulate water
pressure to <80psi. Contact a plumbing professional if you are
uncertain how select/install/maintain a pressure regulating valve.
• Do not install near water pipes which will be in path of a drilling tool
when selecting the position to mount the bracket.
• Mount filter in such a position as to prevent it from being struck by
other items used in the area of installation (waste baskets, etc.);
• Ensure all tubing and fittings are secure and free of leaks.
To reduce the risk of water leakage of flooding, and to ensure
optimal filter performance:
• Change the disposable filter cartridge every six months or sooner if
you observe a noticeable reduction in water flow rate.
• Failure to replace the disposable filter cartridge at recommended
intervals may lead to reduced filter performance and cracks in the
filter housing, causing water leakage or flooding.
• Install with the inlet and outlet ports as labeled. Make sure not to
reverse connections.
• Allow a minimum of 2 1/2" clear space under filter to facilitate
cartridge change.
• Failure to follow instructions will void warranty.
• For questions or concerns, please contact Customer Service
at 1-800-345-3358.
2
Notice
76419 Rev. B
Publicidad
