MANUAL SETUP
INPUT MENU
Use to manually adjust the various parameters related to
the audio and video input.
SET MENU → MANUAL SETUP → INPUT MENU
3)INPUT MENU
.
A)INPUT MODE
B)INPUT TRIM
C)INPUT RENAME
[ ]/[ ]:Up/Down
[ENTER]:Enter
INPUT MODE (Input mode)
Use to designate the input mode for the input sources
connected to the DIGITAL INPUT jacks when you turn on
the power of this unit. For information on the types of
audio signals that can be output by this unit, see "Selecting
the input mode" on page 70.
Choices: AUTO, LAST
A)INPUT MODE
p
AUTO
p
[ ]/[ ]:Select
[ENTER]:Return
• Select AUTO to set this unit to automatically detect the
type of input signals and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that input source. If the type of
input signals is different from the setting, no sounds
will be produced.
64
En
LAST
INPUT TRIM (Input trim)
Use to adjust the input level of the input source.
B)INPUT TRIM
.
TV/STB
VCR
DVD
AUX
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
• Select TV/STB ANALOG to adjust the level of audio
and video signals input at the TV/STB AUDIO INPUT
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select TV/STB DIGITAL to adjust the level of audio
and video signals input at the TV/STB OPTICAL
DIGITAL INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select VCR ANALOG to adjust the level of audio and
video signals input at the VCR AUDIO INPUT jacks
of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select DVD DIGITAL to adjust the level of audio and
video signals input at the DVD COAXIAL DIGITAL
INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX DIGITAL to adjust the level of audio and
video signals input at the AUX OPTICAL DIGITAL
INPUT jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
ANALOG;;;-3.0dB
DIGITAL;;-3.0dB
ANALOG;;;-3.0dB
DIGITAL;;-3.0dB
DIGITAL;;-3.0dB
p