Publicidad
Flat Screwdriver
Tournevis à lame plate
Desarmador plano
Headlight Lens
Lentille de la lampe
Lente de la luz
Replacing Headlight Bulb
Slots
Fentes
Ranuras
- 46 -
Disconnect power cord from
electrical outlet. Lower body to lay
vacuum cleaner flat.
Pry out light lens at slots by inserting
screwdriver into slot, pushing down
on the lens and rotating the
screwdriver handle toward unit.
Remove the light bulb by pulling
straight out.
To replace the light bulb carefully
insert securely into slot. Replace
lens cover.
CAUTION
Do not use a bulb rated over 9W (13V0.
During extended use, heat from the bulb
could overheat surrounding plastic parts.
Replace lens cover by inserting
bottom tab of lens into slot then
applying pressure to top tabs.
A "popping" sound indicates lens is
snapped properly in place.
Publicidad
