INSTALLATION INSTRUCTIONS
UNPACKING AND REMOVING SHIPPING MATERIALS
1.
Remove the box packaging by lifting
up and away from the base cushion.
(Refer to figure 4.)
2.
Open the lid of washer to take out
all accessories including protection
foam. (Refer to Figure 5.)
WARNING: Packaging materials can be
dangerous to children; Keep all packaging
material (plastic bags, polystyrene,
etc.) well out of children's reach. Use of
washer with the foam cushion is strictly
prohibited.
LOCATION REQUIREMENTS
Flooring
•
For best performance, you must install your washer on a solidly constructed floor. Wood floors may need
to be reinforced to minimize vibration and/or unbalanced load situations.
•
Carpeting and soft tile surfaces are contributing factors to vibration which can cause your washer to move
slightly during the spin cycle.
WARNING: DO NOT install your washer in areas where water may freeze, since your washer will always retain
some water in its water valve, pump, and hose areas. Frozen water can damage the belts, the pump, hoses, and
other components. NEVER install on a platform or weakly supported structure.
Electric
•
Use 120Volt 60Hz 15 Amps fuse or circuit breaker.
•
Individual branch circuit serving only for your washer is recommended
WARNING: NEVER use an extension cord.
Grounding
•
Electrical grounding is required for this washer.
•
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current.
•
This appliance is equipped with a power cord having a three-prong grounding plug for use in a properly
installed and grounded outlet.
•
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
WARNING: An improperly connected equipment-grounding conductor can increase the risk of electrical shock.
Check with a qualified technician if you are not sure whether the appliance is properly grounded. DO NOT modify
the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified
Figure 4
Packaging Box
12
Figure 5
Protection Foam