Publicidad
Idiomas disponibles
Idiomas disponibles
SP6731-6 16 Gallon ESF 2018.qxp_SP6731 2/21/18 8:14 PM Page 11
Operation (continued)
Blowing Feature
Your Vac features a blowing port.It can
blow sawdust and other debris.
Follow the steps below to use your
Vac as a blower.
1. Locate blowing port of your Vac.
2. Insert the locking end of the Dual-
Flex™ Locking Hose into the blowing
port of the Vac. The hose should snap
into place. To remove the hose from
the Vac, press the release button in
the hose assembly and pull the hose
out of the Vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose, then place the
car nozzle on the wand.
4. Turn Vac on and you are ready to use
your Vac as a blower.
Dual-Flex
Locking
Hose
Extension
Wand
(Optional)
11
Blowing
Port
Swivel
End of
Hose
Car Nozzle (Optional)
Publicidad
