Makita GRH01 Manual De Instrucciones página 24

MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Replacing filter of dust case
Optional accessory
1. Remove the dust case while pressing down the
lever of the dust case.
1
► 1. Lever
2. Insert the flat-blade screwdriver into the slots of
the filter cover to remove the filter cover.
► 1. Flat-blade screwdriver 2. Filter cover
3. Remove the filter from the filter case.
1
2
► 1. Filter 2. Filter case
4. Attach a new filter to the filter case, and then
attach the filter cover.
5. Close the cover of the dust case, and then attach
the dust case to the dust collection system.
Replacing sealing cap
Optional accessory
If the sealing cap is worn out, the performance of the
dust collection decreases. Replace it if it's worn out.
Remove the sealing cap, and then attach a new one
with its protrusion facing upward.
2
► 1. Protrusion 2. Sealing cap
1
24 ENGLISH
1
2