Publicidad
Idiomas disponibles
Idiomas disponibles
Starting setup
The Setup Wizard appears the first time you turn on the
TV, and assists you to specify the Air/Cable setting, and
program your channels automatically.
IMPORTANT: Make sure that the antenna or cable TV system
connection is made.
1
To turn on the TV, press POWER. (POWER indicator on the
front of the unit changes white. It may take approx. 10 seconds
for a picture to appear on screen.) The Initial Setup Wizard
begins.
2
Press ▲ or ▼ to your desired language.
3
Press SELECT to go to the next step.
4
Select your "TV mode" by pressing ▲ or ▼ to select "Home
Mode" or "Retail Mode". This product qualifies for ENERGY
STAR in Home Mode with its default settings.
5
Press SELECT to go to the next step.
6
Press ▲ or ▼ to choose your time zone, then press SELECT.
Press ▲ or ▼ to select daylight saving time "Yes" or "No" by
pressing SELECT.
• In the rare event that you live within broadcast range of two
stations in two different time zones, the TV may recognize
the wrong station for the auto clock set.
7
Press ▲ or ▼ to select signal type (Air/Cable) that you using,
then press SELECT.
8
Auto Channel Scan will begin. After the scan is completed, a
TV channel appears on the screen.
• Depending on the reception condition, it may take up to 30
minutes to complete scanning channels. Please allow the
process to complete without interruption.
TV operation
1
To turn on the TV, press POWER. (POWER indicator on the
front of the unit changes white. It may take approx.10 seconds
for a picture to appear on screen.)
2
Adjust the volume level by pressing VOL (VOLUME) + or – .
The volume level will be indicated on the screen by a volume
bar.
If the volume increases, the number of bars also increases.
If the volume decreases, the number of bars also decreases.
3
Set the Source option to the appropriate selection (see "Air/
Cable selection" on page 18).
4
Press the Direct Channel Selection Buttons (0-9, –) to
select the channel.
TO SELECT ANALOG CHANNELS
1-9:
Press 1-9 as needed. Example, to select channel 2,
press 2, then press SELECT..
10-99:
Press the 2 digits in order. Example, to select
channel 12, press 1, 2, then press SELECT.
100-135: Press the 3 digits in order. Example, to select
channel 120, press 1, 2, 0, then press SELECT.
TO SELECT DIGITAL CHANNELS
Press the first digits, then press the – button followed by the
remaining number.
Example: To select channel 15-1, press 1, 5, –, 1, then press
SELECT.
• If a channel is selected with only audio content, "Audio
Program" will be displayed on the screen.
• If a channel is selected with a weak digital signal, "No Signal."
will be displayed on the screen.
• The same program may be available on either an analog
channel or a digital channel. You may choose to watch
either format.
VHF/UHF/CABLE CHANNELS
Air
VHF
2-13
UHF
STD/HRC/IRC
14-69
14-36
37-59
60-85
86-94
95-99
100-135
01
NOTE:
• If a channel with no broadcast is selected, the sound will
automatically be muted.
• It may take a few seconds for a digital channel picture to appear
on screen after being selected.
To select the video input source
To view a signal from another device connected to your TV, such
as a VCR player, press INPUT, then press ▲ or ▼ to select the
desired input, then press SELECT.
Cable
VHF
2-13
(A) (W)
(AA) (WW)
(AAA) (ZZZ)
(86) (94)
(A-5) (A-1)
(100) (135)
(4A)
13 EN
Publicidad
