Publicidad
Idiomas disponibles
Idiomas disponibles
CH ▲/▼
Press and release CH ▲/▼. The TV automatically stops at the next
channel.
For proper operation, before selecting channels, they should be
set into the memory. See "Channels setup" on page 18.
INFO
Press INFO to display the current information on the screen.
When the TV receives a digital signal, the digital information will
appear.
• Channel number
• Channel label (if preset)
• Parental Control
NOTE:
• While in the TV input, press INFO again to get more info and
press INFO again to clear the display.
LAST CH
This button allows you to go back to the last channel selected by
pressing LAST CH. Press LAST CH again to return to the channel
you were watching.
MUTE
Press MUTE to switch off the sound. The TV's sound will be
silenced and the MUTE icon will appear on the screen. The sound
can be switched back on by pressing this button again or by
pressing the VOL (VOLUME ) + or – buttons.
EN 14
• Resolution
• Broadcast program name
• Audio language
Quick guide for menu
operation
Example: Select Menu Language.
1
Press INPUT to select TV mode.
2
Press MENU. The TV menu screen will appear.
3
Press ▲ or ▼ to select "Setup", then press ▶ or SELECT.
4
Press ▲ or ▼ to select "Menu Language", ▶ or SELECT.
Then press ▲ or ▼ to select the desired language.
5
Press EXIT to return to the normal screen.
NOTE:
• On the following pages, the menu can be called in the same way
described above, by pressing the MENU button.
• If no buttons are pressed for more than about 10 seconds, the
TV will return to normal viewing automatically.
• During TV or external input mode, if there is no signal reception,
the TV will go to standby after approx. 15 minutes.
Publicidad
