Publicidad
Idiomas disponibles
Idiomas disponibles
Fit the foot rails
A
(
)
Looking on the inside of the vehicle's original rook tracks loosen and remove the six bolts securing each
track to the vehicle. Remove the tracks from the vehicle.
B
(
)
Place a Foam Washer (Item 10), white backing facing up, over each of the bosses on the vehicle's roof.
( C )
Place the Foot Rails onto the vehicle's roof, lining up the mounting holes in the bottom of the Foot Rails
with the bosses on the vehicles roof. The Product Sticker must go to the rear of the vehicle and must be
facing outwards. Push the Foot Rails as far back as possible.
Product Sticker
D
(
)
Secure the Foot Rails to the vehicle using twelve M6 x 35 Hex Bolts, twelve M6 Spring Washers and twelve
M6 x 19 Flat Washers (Items 7, 8, 9). Place a M6 Nut Cap (Item 6) over each Bolt Head once fastened.
REV_A01
3
Publicidad
