Denver PBA-6001CMK2 Manual De Instrucciones página 19

Thank you for using SMLH products.
Please read the instructions carefully before using the product.
Follow the instructions and use it properly.
Instructions
Charging DENVER PBA-6001 (Figure 1/Figure 2)
1. Use original USB data cable and connect microUSB to microUSB port on DENVER
PBA-6001;
2. Connect USB cable to USB port on DC5V USB charger or computer.
If LED signal flickers, it means DENVER PBA-6001 is being charged;
Please pull out power supply after recharging fully.
Charging digital product with DENVER PBA-6001 (Figure 3)
1. Check if the charging voltage of the digital product is compatible with the DC5V
output voltage of DENVER PBA-6001.
2. Use the digital product's original cable, and connect one end to the digital
product, the other end to DENVER PBA-6001. If battery signal (output signal)
lights up, it means the charging process starts. When all signals light up, it means
the digital product is fully charged.
Flashlight function
Press the switch for 2~3 seconds to turn on the LED flashlight andanother 2~3
seconds to turn it off.
19
English / English