Lenco LS-410WA Manual Del Usuario página 26

Troubleshooting
Problem
The platter does
not spin.
The platter
spins, but there
is no sound
from the
turntable?
The stylus skips.
The turntable is
making a
strange
'howling'
sound.
Solution
•
Is the AC adapter connected to the outlet?
- Connect the AC adapter to the outlet.
•
What's the status of the indicator light?
- The indicator light is green. That means the turntable is in
AUX IN mode. Please press the mode button twice to switch
to Turntable mode.
- The indicator light is blue. That means the turntable is in
Bluetooth mode. Please press the mode button once to switch
to Turntable mode.
- The red indicator light will indicate Turntable mode.
•
Has the belt slipped from the platter?
- Correctly place the belt on the platter.
•
Is the belt placed on the motor pulley?
- Check that the belt is placed on the motor pulley
(brass-colored) correctly.
•
Has the belt been damaged?
- Replace it with a new belt.
•
Is the stylus damaged?
- Check the stylus and replace it, if necessary.
It's suggested to replace the stylus after 400 hours of use.
•
Is the stylus placed correctly on the body of the cartridge?
- Check the cartridge and adjust it, if necessary.
•
Is the record warped?
- Check the record.
•
Is the record scratched?
- Check the record.
•
Is the stylus pressure correct?
- Refer to "Cartridge Tracking Force Adjustment" to readjust the
tracking force.
•
Is the product picking up excessive vibrations from the floor,
surfaces of the walls, or nearby speakers?
- Decrease the vibrations or mount the product on a surface
that is not subject to the effects of vibrations.
•
Is the product mounted on an unstable surface?
- Check whether the surface on which the product is mounted
is suitable.
25