Yard force YF22-3N1SPVS-SC Manual De Uso Y Cuidado página 16

4. Once the engine is running, put the starter rope into the rope guide (see Fig. 16).
TO STOP THE ENGINE
As shown in Fig. 17
Release the Engine On/Off Control Bar. It will return to its initial position and the engine will automatically
switch off.
DRIVE CONTROL
As shown in Fig. 18
1. Self-propelling is controlled by holding the engine on/off control bar down to the handle and push the
self-propelling bar to the handle.
NOTE: Always keep the self-propelling control bar completely against the main handle. Operating
with the self-propelling bar away from the main handle will cause damage to the transmission.
2. To stop forward motion without stopping the engine, release the self-propelled drive control bar while still
holding the engine on/off control bar down against the handle to continue mowing without self-propel
drive activated.
NOTE: After releasing the self-propel drive control bar, if the mower will not roll backwards, push
the mower forward slightly to disengage the drive wheels.
OPERATION
Fig. 16
Fig. 17
Fig. 18
16
Hotline: 1-866-902-9690