8. Settings
The following settings are essential to the successful operation of the heating system.
Press
+
Together
Setting
The following settings are available when the thermostat is locked or unlocked.
MODE
Select heat or off.
SET ROOM
Set the room temperature while in the occupied time period. Available when a
room sensor is connected.
SET ROOM
Set the room temperature while in the unoccupied time period. Available when a
room sensor is connected and a schedule or scenes are selected.
SET ROOM AWAY
Set the room temperature while in the away scene. Available when a room
sensor is connected and a schedule or scenes are selected.
SET FLOOR
Set the floor temperature while in the occupied time period. Available when an
auxiliary floor sensor is connected.
SET FLOOR
Set the floor temperature while in the unoccupied time period. Available when an auxil-
iary floor sensor is connected and the schedule or scenes switch settings are on. "Off"
is the factory default when there are both room air and floor temperature sensors.
LIGHT
Select when the display backlight should operate. Auto operates the backlight for
30 seconds after a keystroke.
UNITS
Select the temperature units.
TYPE AND SOFTWARE VERSION
Device Type number. Hold the
system overrides.
ADDRESS
The tekmarNet
®
"Auto" are alternated when using automatic addressing.
SCHEDULE
The thermostat can follow a shared network schedule. Select to follow either
schedule master 1, 2, 3 or 4. Requires tekmarNet.
A Watts Water Technologies Company
• Press and hold down both the
to change from one step to the next.
• Release both buttons once the step has been reached.
• Press the
• Press and hold down both the
seconds to go to the next step, OR
• After 15 seconds of no button activity, the display goes back
to normal operation.
button to view the software version and view any
address is shown in the large number field. The address and
or the
button to change the setting, if available.
3 of 12
and
buttons for 3 seconds
and
buttons for 3
© 2015
532_Q - 02/15