Publicidad
User's Manual
E N
2.1 Intelligent drifting scooter steps
Step1. Start the smart drifting scooter, press the power switch.
Step2. Driving to the trigger switch operation indicator light on
single foot mat, automatic balancing system into the state,
maintain smooth fuselage on the other foot after can operate.
Step3. Manipulation of the drifting scooters after successful
standing balance of center of gravity, intelligent drifting
scooter mobile will remain state. Small forward or backward
through the body to control the smart drifting scooter forward
or backward, remember that the body movement range is too
big.
NOTE: If the trigger when the foot switch intelligent
platform drifting scooter not in level state, the beep
will alarm and alarm indicator light, system into
automatic balance state, at this time are prohibited.
Step4. manipulation of the drifting scooter left and right.
Step5. get off the bus, get off
before you stop intelligent
drifting scooter balance state, one foot down, the other one
foot in the left drifting scooter again.
17
Publicidad
