using the shaver
Note: You can also use the shaver directly from the mains. Simply connect the
shaver to the mains.
shaving
1
Press the on/off button once to switch on the shaver.
2
Move the shaving heads over your skin. Make circular movements.
-
Your skin may need 2 or 3 weeks to get accustomed to the Philips
shaving system.
3
Press the on/off button once to switch off the shaver.
4
Clean the shaver (see chapter 'Cleaning and maintenance').
Trimming (PT919/PT866/PT860/PT856/PT845/PT739/PT737/
PT731 only)
You can use the trimmer to groom your sideburns and moustache.
1
Press the on/off button once to switch on the shaver.
2
Push the trimmer slide downwards to open the trimmer.
You can now start trimming.
,
3
After trimming, close the trimmer and switch off the shaver.
cleaning and maintenance
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
-
Clean the shaver after every shave for optimal shaving performance.
-
Regular cleaning guarantees better shaving performance.
-
For the best cleaning results, we advise you to use the Philips Cleaning
spray (HQ110).
-
Be careful with hot water. Always check if the water is not too hot,
to prevent your hands from getting burnt.
Note: Water may leak from the socket at the bottom of the shaver when you
rinse it. This is normal and not dangerous because all electronics are enclosed
in a sealed power unit inside the shaver.
English
7