Publicidad
Idiomas disponibles
Idiomas disponibles
4
Turn the lock anticlockwise (A) and remove the retaining frame (B).
5
Remove and clean one shaving head at a time. Each shaving head
consists of a cutter and a guard.
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is restored.
-
Remove the cutter from the shaving guard and clean it with the brush.
-
Clean the inside and outside of the shaving guard with the brush.
6
Put the shaving heads back into the shaving unit.
Note: Make sure that the projections of the shaving heads fit exactly into the
recesses.
English
9
Publicidad
