Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Type of Accessory
Aluminum Oxide
Grinding Bits
Fiberglass Cut-off
Wheel
Sanding Drums
Felt Polishing Wheels
Drill Bit
Wire Brush
Engraving Bit
High-speed Cutter
Conical Grinding
Stone
MAINTENANCE
WARNING:
When servicing, use only identical replacement parts.
Use of any other parts could create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
SPEED DIAL SETTINGS
Grinding nails/screws
Cut bolts, screws, nails, thin wood
Sanding white pine
Polishing steel, aluminum, brass, stone, ceramic, glass
Drilling holes into wood
Brushing metal
Engraving soft metals
Shaping curved surfaces
Grinding metal edges
NOTE: ILLUSTRATIONS START ON PAGE 12
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
Application
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
10 – English
Speed (x 1000)
32
30
30
12-15
32
15
High speeds for woods,
slow speeds for metals
20-33
32
Publicidad
