Publicidad
Idiomas disponibles
Idiomas disponibles
Parts identification
Front
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Foil frame release
buttons
5 Power switch
Can be locked when
carrying around, or
can be set to the
sonic vibration
cleaning mode when
cleaning with water.
Back
a
b
c
d
6 Lamp display
a. Shaving sensor
lamp ( )
b. Battery capacity
lamp
c. Switch lock lamp
( )
d. Charge status
lamp ( )
7 Appliance socket
8 Outer foil section
9 System outer foil
release buttons
Inner blades
; Trimmer
Trimmer handle
B AC adaptor (RE7-87)
Adaptor
Power plug
Cord
Appliance plug
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver�
2
Plug the adaptor into a
household outlet�
• Check that the charge status
lamp ( ) is glowing.
• Charging is completed after
approx. 1 hour.
• If the shape of the plug does not
fit the power outlet, use an
attachment plug adaptor of the
proper configuration.
3
Disconnect the adaptor after
charging is completed�
Accessories
C Cleaning brush
D Oil
2
1
11
Publicidad
