shown in Fig.11.
- Remove adhesive tape L and rest the lower chimney piece above the cooker hood (Fig.12).
- If the cooker hood is supplied with a lower chimney piece that must be fixed to the hood
body with screws, remove the anti-grease filters from the hood by acting on the relevant
handles. Then screw the lower chimney piece pipe to the inside of the hood, using screws P
(Fig.13). Relocate the filters in their seat.
IMPORTANT - The range hood must be secured to wall studs or use drywall anchors
capable of supporting 75 lbs.
12
L
H
- 16 -
F
P
11
13