Descargar Imprimir esta página

ARDES AR4W04P Folleto De Instrucciones página 20

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 46
6.
Repeat steps 2 to 5 to set the desired days/time. Unplanned days and time
are equivalent to stand-by periods.
Once the working period has been set, it's possible set the desired temperature
for each period:
1.
Push "DAY" pushbutton to select the day
2.
Once the day has been selected, press "EDIT" pushbutton repeatedly to
select the working period (from P1 to P6).
3.
Push + o - pushbuttons to select the desired temperature
4.
Press "EDIT" pushbutton to confer and select the next working period.
After repeat point 3.
5.
Push "DAY" pushbutton to confirm the settings and select the next day;
6.
Repeat steps 2 to 5 to set the desired days/periods.
7.
Push "OK" pushbutton to save the settings.
-
WARNING: the weekly programming will work correctly only if the time
and day of the week have been set and if the working period P1-P6
have been set.
To deactivate the weekly program and the related temperature press "P"
pushbutton; the "P" indicator light will turn off in the control panel.
-
Warning: the weekly settings will be stored till the unit is in stand-by
mode or working status. In case of power failure, removing the plug
from the wall socket, or switching off the appliance using the On / Off
switch (1), all settings will be lost.
Set open-window detection (if unit is in working status):
This function shut off the appliance if the ambient temperature deviates from the
desired temperature of 5 ° C-10 ° C, in less than 10 minutes.
When this function is activated, the unit also activates the automatic working
mode.
To set the open-window detection:
1.
Push open-window pushbutton (
automatic working mode indicator light will lights up in the display. The
display will show the desired temperature (23°C as default).
2.
Push + o - pushbutton to set the desired temperature (from 10°C to 49°C).
3.
Push "OK" pushbutton to confirm.
To deactivate this function, push the open-window detection (
the indicator light related to the automatic working mode and the indicator light
related ot the open-window detection will turn off in the display.
-
Warning: the unit switch in stand-by mode after 12 hours of continuous
operation.
-
N.B! If open-window detection and weekly program are activated
simultaneously:
- during period that has not be setted the appliance will be in stand-by
mode.
- during working period the unit working as the setting temperature
under open-window detection.
). The related indicator light and the
20/89
) pushbutton:

Publicidad

loading