Publicidad
Idiomas disponibles
Idiomas disponibles
3.2 Display and Control Panel
1
Using the Control Panel
1. Freezer temperature set button
2. Super freeze symbol (Super freeze LED)
3. Alarm symbol (Alarm LED)
4. Freezer adjusted temperature indicator
3.3 Operating your Freezer
Lighting (If available)
When the product is plugged in for the
first time, the interior lights may turn on 1
minute late due to opening tests.
3.3.1 Alarm light
In case of a problem within the freezer, the
alarm led will release red light.
3.3.2 Freezer Temperature Set Button
This button allows setting temperature
of the freezer. In order to set values for
freezer partition, press this button. Use this
button also to activate super freeze mode.
3.3.3 Super Freezer Mode
When Would It Be Used?
• To freeze huge quantities of food.
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
How To Use?
• Press temperature set button until super
freezing light comes on.
• Super freezing led will light during this
mode.
• Maximum amount of fresh food (in
kilograms) to be frozen within 24 hours is
shown on the appliance label.
• This option shall be turned on 24 hours
before placing the fresh food to the
2
3
EN - 58
4
freezer. After 54 hours, it returns to the
normal set value.
During This Mode:
If you press temperature set button, the
mode will be cancelled and the setting will
be restored from -16.
3.3.4 Freezer Temperature Settings
• The initial temperature of the setting
display is -18 °C.
• Press freezer setting button once.
• Every time you press the button, the
setting temperature will decrease.
(-16 °C, -18 °C, -20 °C,.. super freezing)
• If you press freezer setting button until
super freezer symbol is displayed on
freezer.
• Settings display and you do not press
any button within the following 3 seconds,
super freezing will blink.
• If you keep on pressing, it will restart from
last value.
Recommended Temperature Values for
Freezer
When to adjust
For minimum freezing capacity
In normal usage
For maximum freezing capacity
3.3.5 Stand-By Mode
How To Activate ?
Set "2" set value and push set button until
all leds are blink three times.
How It Works?
In stand-by mode; all components will be
disabled. If user push set button while in
Inner
Temperature
-16
C, -18
C
o
o
-18
C, -20
C,
o
o
-22
C
o
-24
C
o
Publicidad
