Siemens VSZ3B212 Instrucciones De Uso página 14

Pull out the mains plug before carrying out any work
on the vacuum cleaner.
Do not operate the vacuum cleaner if it is damaged.
Unplug the appliance from the mains if a fault is de-
tected.
For safety reasons, only authorised after-sales service
personnel are permitted to carry out repairs and fit re-
placement parts to the vacuum cleaner.
Protect the vacuum cleaner from the weather, moistu-
re and sources of heat.
Do not pour flammable substances or substances con-
taining alcohol onto the filters (dust bag, motor protec-
tion filter, exhaust filter, etc.).
The vacuum cleaner is not suitable for use on con-
struction sites.
= Vacuuming up building rubble could damage the >
appliance.
When not in use, switch off the appliance and pull out
the mains plug.
At the end of its life, the appliance should immediately
be rendered unusable, then disposed of in an approp-
riate manner.
!
Please note
The mains socket must be protected by at least a 16
amp circuit breaker.
If a circuit breaker is tripped when you switch on the
vacuum cleaner, this may be because other electrical
appliances which have a high current draw are con-
nected to the same power circuit.
To prevent the circuit breaker from tripping, select
the lowest power setting before switching the appli-
ance on, and increase the power only once it is run-
ning.
Disposal information
Packaging
The packaging is designed to protect the vacuum
cleaner from being damaged during transportation. It
is made of environmentally friendly materials and can
therefore be recycled. Dispose of packaging that is
no longer required at an appropriate recycling point.
Old appliance
Old appliances still contain many valuable materials.
Therefore, please take appliances that have reached
the end of their service life to your retailer or recyc-
ling centre so that they can be recycled. For current
disposal methods, please enquire at a retailer or your
local council.
Disposal of filters and dust bags
Filters and dust bags are manufactured from en-
vironmentally friendly materials. Provided they do
not contain substances that are not permitted in
household waste, you can dispose of them with your
normal household waste.
14
General information
Dust bags
We therefore recommend that you only use our origi-
nal dust bags.
Your appliance is a highly efficient vacuum cleaner
that achieves excellent cleaning results when used
with high-quality dust bags. Only by using high-qua-
lity dust bags (such as Siemens original dust bags)
can you ensure that your vacuum cleaner is working
at the energy efficiency class, dust pick-up rate and
dust retention capacity listed on its EU energy label.
The use of inferior-quality dust bags (e.g. paper
bags) can have a negative effect on the service life
and performance of your appliance. Using unsuitable
or inferior-quality dust bags can also damage your
vacuum cleaner. Such damage is not covered by our
guarantee. You can find more information about this
at www.siemens-home.bsh-group.com/dust-bag.
You can order our original vacuum cleaner bags here.
Accessories
Your accessories (nozzle, suction pipe, etc.) may
look different from but work in the same way as tho-
se depicted in the illustrations in this instruction ma-
nual.
Symbols
For vacuuming upholstered furniture, cushions
and curtains.
For vacuuming rugs and carpets
For vacuuming hard floors
Notes on the energy label
This vacuum cleaner is a general purpose vacuum clea-
ner with a primary hose. To achieve the declared energy
efficiency and cleaning performance class on carpet,
please use the interchangeable universal nozzle.
To achieve the declared energy efficiency and cleaning
performance class on hard floor with nooks and cran-
nies, please use the hard floor nozzle provided.
These calculations are based on the Commission Dele-
gated Regulation (EU) No. 665/2013 of 3rd May 2013
supplementing Directive 2010/30/EU.
Unless otherwise stated, all the procedures refer-
red to in these instructions were carried out in ac-
cordance with the EN 60312-1:2017* standard.
*As the motor service test is carried out with the dust
collector empty, the stated motor service life must
be increased by 10% for tests with the dust collector
half filled.