Publicidad
Access your cables
Both the top and bottom panels of the enclosure have cable access covers that you
can remove to access and manage your cables.
1. To take off a cable access cover, use a Phillips type screwdriver to remove the two
screws on both ends of the cable access cover.
2. Pull the cable access cover away from the enclosure. (figure 4)
figure 4
To put the cable access cover back on, place the cover over the cable access opening
and use a Phillips type screwdriver to insert the screws through the cover and into the
enclosure. Tighten the screws.
Instruction manual
7
Publicidad
