READ ALL INSTRUCTIONS!
EN
READ OPERATOR'S MANUAL
Residual risk!
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols and the explanations
with them deserve your careful attention and understand-
ing. The symbol warnings do not, by themselves, eliminate
any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including
all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
tools can result in foreign objects being thrown
into your eyes, which can result in severe
eye damage. Before beginning power tool
operation, always wear safety goggles or
safety glasses with side shields and a full face
shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields.
4
56 VOLT MULTI TOOL POWER HEAD — PH1400E
People with electronic devices, such
Indicates DANGER,
The operation of any power
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assem-
ble and operate it.
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of
Read
injury, user must read and
operator's
understand operator's manual
manual
before using this product.
Always wear safety goggles
Wear Eye
or safety glasses with side
Protection
shields and a full face shield
when operating this product.
This product is in accordance
CE
with applicable EC directives.
Waste electrical products
should not be disposed of
WEEE
with household waste. Take
to an authorized recycler.
Do Not
Do not use in the rain or
Expose To
leave outdoors while it is
Rain
raining.
Protection against ingress of
IPX4
IP Symbol
water degree 4
V
Volt
Voltage
mm
Millimeter
Length or size
cm
Centimeter
Length or size
kg
Kilogram
Weight
Direct
Type or a characteristic of
Current
current
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings and
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Original instructions