Manuales relacionados para PRETUL SOIN-130P
Resumen de contenidos para PRETUL SOIN-130P
- Página 1 Manual Inverter Welder Work Cycle Applies for: Code Model 27225 SOIN-130P Read this manual thoroughly CAUTION before using the tool.
- Página 2 Contents CAUTION Technical specifications Power Requirements To gain the best performance of the tool, prolong the duty life, General Power Tools Safety Warnings make the Warranty valid if necessary, and to avoid hazards Safety Warnings for Inverter Welders of fatal injuries please read and understand this Manual before Parts using the tool.
- Página 3 Technical specifications SOIN-130P Código 27225 Descripción Inverter Welder Input Voltage 127 V~ / 50 Hz / 60 Hz Current 37 A Rated Input Capacity 4.7 kVA Power Factor Cos 0.73 Max No Load Voltage 69 V~ Current Range 20 A - 130 A Rated Duty Cycle 4 minutes’...
- Página 4 General Power Tools Safety Warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety Warnings for Inverter Welders Protection Equipment for Welding Prevent Injuries and Accidents WARNING WARNING • Wear a welding mask to protect eyes • Risks of electric shock: and face when soldering. Assure the mask protective glass An electric shock coming from the soldering electrode may shade is adequate for the soldering process to carry out.
- Página 6 Parts Carrying Handle Welding Process Indicator Lights Lights Hammer-Brush for Slag Removal VRD Security System Current Control Welding Process Selector (SMAW or TIG) Positive Connection ( + ) Negative Connection ( - ) Grounding Clamp to the Work Piece Power Cord Switch Ventilation...
- Página 7 Installation (SMAW) Connections To prevent an electric shock, the user must CAUTION Reverse Polarity see the information in “Power Requirements” in page 3 and 5. • The fast connections of the electrode holder and the ground clamp are inserted and turned one quarter of a turn in a clockwise direction in the outlets set in the front panel to secure perfectly.
- Página 8 Installation (TIG) TIG Connection • This inverter welder can also be used for TIG welding, a high-quality welding process with non-consumable tungsten electrodes and arch protected with inert gas like argon gas o helium. • TIG welding is ideal to weld stainless steel, iron and copper. •...
- Página 9 Start Up Preparation VRD security system • Only through experience, practice and care a good welding • Activate the VRD (Voltage Reduction Device) system by process can be guaranteed. pressing the button ( ) to reduce voltage during the bait •...
- Página 10 Start Up Examples of welding Correctly Applied Welding Electrode movement too fast and / or very low current. Electrode movement too slow and / or very high current. Electrode too separated from the work piece. Spiral movement. Half-Moon movement. Bevel Zigzag Movement.
- Página 11 Maintenance • The correct use and regular cleansing extend the useful life of the welder. CAUTION • Only qualified personnel shall carry out repairs. We recommend visiting a Authorized Service Center to repair your welder, get supplies or accessories. Regular Maintenance Storage •...
- Página 12 Notes ENGLISH...
- Página 13 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center. AGUASCALIENTES DE TODO PARA LA CONSTRUCCIÓN MORELOS...
- Página 14 Model Brand 27225 SOIN-130P This product is guaranteed for 1 year. To make the warranty valid or purchase parts and components you must present the product in Corregidora 22, Col. Centro, Alc. Cuauhtémoc, CDMX C.P. 06060 or at the establishment where you purchased it, or at any Truper Service Center listed in the annex to the warranty ®...