Publicidad
Idiomas disponibles
Idiomas disponibles
Features
continued
Mounting Brackets: Use these brackets to mount the
PDU.
PS/2 Port: Use this port to connect a Tripp Lite
ENVIROSENSE environmental sensor to provide remote
temperature/humidity monitoring and a dry contact
interface to control and monitor alarm, security and
telecom devices. Contact Tripp Lite Customer Support at
(773) 869-1234 for ordering information. Note: Do not
connect a keyboard or mouse to this port.
Configuration Port: Use this port to provide a direct
terminal connection to a computer with a terminal
emulation program. A configuration cable (part number
73-1243) is included with the PDU. If you need to order
a replacement cable, contact Tripp Lite Customer Support
at (773) 869-1234.
Ethernet Port: Use this RJ-45 jack to connect the PDU
to the network with a standard Ethernet patch cable. The
Link LED
and Status LED
A
conditions, as shown in the table below. This port is not
compatible with PoE (Power Over Ethernet) applications.
Network Operating Conditions
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady Green
Flashing Amber
12-10-311 93-327B.indb 6
indicate several operating
B
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
6
A
B
12/13/2012 4:09:21 PM
Publicidad
