Publicidad
Idiomas disponibles
Idiomas disponibles
Deutsch
ENGLISH
28
Technical Data
Flip over combination mitre / bench saw
Art. No
Rated voltage
Rated frequency
Rated input
Rated idle speed
Saw blade ø
Saw blade thickness
Saw blade bore diameter
Splitter thickness
Max. cutting depth when operating the tabletop circular saw
Mitre saw Max. cutting capacity
Mitre 0° x Bevel 90°
Mitre 0° x Bevel 45°
Mitre 45° (left) x Bevel 90°
Mitre 45° (left) x Bevel 45°
Workpiece dimensions min.
Inner diameter – suction nozzles
Weight net / gross
Noise details
Sound pressure level L
Sound power level L
Measured according to EN 61029; Uncertainty K = 3 dB (A)
Wear ear protectors!
The numerical values given are emission levels and not necessarily safe working levels. Although there is a
correlation between the emission levels and the acceptable exposure levels, they cannot be reliably used to
determine whether or not any additional safety measures are necessary. The characteristics of the work space,
other sources of noise, i.e. the number of machines and other processes running in the vicinity and so on, are all
factors that can influence the actual exposure levels of the employees. Moreover, the acceptable exposure levels
can vary from country to country. This information should enable the machine's operator to carry out a better
assessment of the risks and hazards.
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision of the
trainer during occupational education.
pA
WA
Read and understand the operating
instructions before using the
appliance. Familiarise with the
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The saw is intended solely for sawing profiled timber
within the cutting performances specified in the
technical data.
Not observing general regulations in force and
instructions from this manual does not make the
manufacturer liable for damages.
TKGS 210
55270
220-240 V~
50 Hz
1500 W
4500 min
-1
210 mm, 24 Z
1,4 mm
30 mm
2 mm
40 mm
55x120 mm
35x120 mm
55x65 mm
35x30 mm
200x10 mm
30 mm
12 kg / 15 kg
103 dB (A)
116 dB (A)
Publicidad
