Titan Pro Rail Manual De Instrucciones página 6

STAIR BRACKET CONTINUED
7.
Hold the aluminum bracket in place on
the end of the rail; mark the bottom of the
aluminum bracket onto the post (Fig. 15).
Push the rail aside. Pre-drill and attach the
aluminum bracket (Fig. 16). (Bottom rail
bracket installation depicted.)
6
Repeat at the top of the stair section.
Place the assembled rail section into the four
aluminum brackets and secure with 2 set
screws in each bracket (Figs. 17 and 18).
(Fig. 15)
(Fig. 16)
8.
Install bracket covers by wrapping them
around the rails and aluminum brackets.
Press the attachment tabs up into the slots
of the aluminum brackets (Figs. 19 and 20).
Snap trim rings around bottom flange
of support post. Attach post cap, sold
separately, using vinyl adhesive.
(Fig. 17)
(Fig. 18)
(Fig. 19)
(Fig. 20)