Publicidad
Idiomas disponibles
Idiomas disponibles
• Clean the blades from the grease leftover.
15.3. Disassembly and grease
General maintenance, cleaning, lubrication and blade replacement requires some disassembly and
assembly of your pruner.
The cover is fixed to the pruner by 2 screws. The adjusting nut is fixed with a central screw.
By removing the cover, the central screw, the adjusting nut, the bearing and the hexagonal bolt, you
can access, maintain, clean, lubricate and replace the blades when needed.
It is recommended to grease the gears each 3-4 working days to guarantee the correct operating life
of the tool.
A. Remove the M5 hexagon socket
counterclockwise as shown.
38
A
B. Remove the nut clockwise as shown and
remove the washer and the flat needle roller
bearing.
B
Publicidad
