Volpi KV300 Manual Del Usuario página 27

•
Do not use the pruning shear in the rain.
•
The appliance is designed for trimming hedges or branches. Do not use to cut twigs, hard wood or
other objects.
•
Do not attempt to dislodge a blocked/trapped blade before switching the tool off.
•
Before start with the trimming check the hedge or branch for hidden objects such as wire etc.
•
When operating the tool hold it firmly with one hand, and keep the blade at least at 15cm from the
other hand and other parts of the body
•
Do not use the tool in the proximity of flammable liquids or gasses. Fire and explosion risk exists in
the event of a short circuit.
•
The blades have to be checked for wear in regular intervals and reshape ended. Blunt blades will
overload the machine. Resulting damages are not covered by warranty.
•
Do not attempt to repair the tool your-self, bring the tool to our Service Center in case of need. All
works, which are not described in this manual, may only be performed by our Service-Centre
4.3. Special safety instruction for battery tool
•
Charger design for use only indoor. Charging operations have to be performed indoor.
•
Remove the battery before cleaning the charger to avoid damage and risk of electrical shock.
•
Do not expose battery in strong light. Do not put battery on hot surface. It can cause battery
explosion.
•
Fully cold battery before charging.
•
Do not disassemble the battery; do not damage battery, in order to avoid injury.
4.4. Use charger correctly
•
Charger only use on rechargeable battery. If not, it can cause fire or explode. Use original charger to
keep safety.
•
Always check charger, wire and plug before use. If damaged, please move to Customer Assistance
Service to repair. Do not use damaged charger, Do not repair by yourself, this will keep the tool
safe.
•
Check voltage of charger match the battery value, if not may injury yourself.
•
Keep charger clean, away from drippy or rain environment. Do not use the charger outdoor, dirt or
water can cause injury.
•
The charger is designed for original battery only. Otherwise may be cause damage or fire.
•
Avoid damaged charger will reduce injury.
•
Do not use chargers on tinder surface (e.g. paper or dry goods).
•
The battery is not fully charged when you buy it, you must charge 2,5 hours before first use the tool.
Connect the battery to charger before power on.
•
Normal charging time is 2,5 hours, Do not charge the battery for too long time, it will damage the
battery. Make sure charging at indicate just 1 LED light, this will ensure at battery life.
27