Publicidad
Idiomas disponibles
Idiomas disponibles
•
Clean the blade after every use, protect by oil or spray protection.
•
After continuous work for 8 hours, please open the trigger cover protection of the equipment and
clean up wood chips and other impurities
15.1. Sharpening
• Sharpening is very important to keep blade in good condition and ensure long life.
• The tool have attached accessory to sharp blade, always check blade is in good condition before to
start work. Of course, the frequency of sharpening depends on the nature of the sheared wood
(hardness and diameter), pruning rate and sharpening tools (special abrasive tools are provided). As
a result, the blade must be checked frequently during the initial period of use to determine the
appropriate grinding time (check every 15 minutes and you will quickly calculate)
15.2. Greasing of the blades
The greasing of the blades has sto be repeated each 2-3 working days to guarantee the correct
performance of the tool and to avoid the seize of the blades.
• Open the blades of the pruner.
• Turn off the tool and remove the battery.
• Apply the grease between the moving blade and the fix blade (see the picture below).
• Put together the battery and the tool.
• Turn on the pruner and pull the trigger some times to get the grease through the blades.
• Clean the blades from the grease leftover.
15.3. Greasing and blade replacement
General maintenance, cleaning, lubrication and blade replacement requires some disassembly and
assembly of your pruner.
The cover is fastened to the pruner by 4 screws. The center bolt is secured with an adjustable gear nut,
which is locked into place by a gear nut clip. A single bolt secures the gear nut clip.
34
Publicidad
