Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DA-EN-DE-ES - TECHNICAL USER GUIDE
Bottom part
Direction indicator
Coupling
Figure 5
dol-sensors a/s
Hedelund 4, Glyngøre
1.
2.
3.
4.
5.
6.
Connector
7.
See also Figure 10 on page 22.
AVOID TIGHTENING OR ADJUSTING THE WEATHER SENSOR BY
TURNING THE TOP PART OF THE SENSOR.
Nut coupling
7870 Roslev
Denmark
Secure the mast bracket to the mast.
Pull the cable between the weather sensor and the connection
box through the mast bracket. The cable between the weather
sensor and the mast bracket is not rodent-protected.
Tighten the nut coupling on the mast bracket (tighten by hand
only).
Mount the plug on the weather sensor.
Tighten the coupling securely onto the weather sensor. Hold onto
the bottom part of the weather sensor only (tighten by hand only).
The gasket must be adapted to the actual cable with the sealing
ring provided.
Mount the connection box with the four screws supplied.
Number
Wire colours
1
Red (RD)
2
Black (BK)
3
White (WH)
4
Not connected
5
Not connected
6
Not connected
7
Yellow (YE)
8
Orange (OG)
9
Blue (BU)
10
Not connected
Table 1
Tlf. +45 72 17 58 88
Fax +45 72 17 59 59
Plug connectors
10
7
1
8
6
2
9
5
3
4
www.dol-sensors.com
Publicidad
Tabla de contenido
