Genie LA 600 A3 Instrucciones De Funcionamiento página 8

f) Do not insert any laminating film without the contents.
g) Never utilize laminating pockets on one side or when they are rolled up.
h) Only utilize laminating foils that are also described as such. Other kinds of film, like
transparent wallets for example, are unsuitable for laminating!
Laminating:
1 (Pic. 1) Insert the material within the laminating film straight and with the closed side
first into the feed opening on the machine's front side. When the green Ready light
stops flashing, the material will fed automatically.
2. The laminated material that emerges from the delivery opening on the machine's
back side is not allowed to be pulled out by force. Wait until it has run out of the
machine completely. Let the laminated material cool down briefly!
3. Switch off the machine after the laminating has ended, by setting the switch to 'O'. Let
the machine cool down and always pull the plug out of the mains socket outlet after
using the machine.
Note: Do not feed the laminator further with foil in case of a blockage. Turn off
the device immediately!
The pouch will only feed in when the green ready lamp is on.
Cleaning and care
1. Please pull out the plug from the mains socket outlet always, in order to clean the
machine. Take care while doing so that the plug does not come into contact with any
liquids.
2. Allow the machine to cool down before cleaning it.
3. Clean the machine with a slightly moist, soft cloth. Do not use any caustic or abrasive
cleaning agents while doing so.
Delivery:
Laminator GENIE LA 600 A3
Instruction manual
Pic. 1
8
Pic 2