PACKAGE CONTENTS
C
A
B
E
D
HARDWARE CONTENTS (not shown actual size)
AA
x 1
Touch-up Pen
(not included for Item #5083406)
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble or install the product.
WARNINGv
Do not stand on vanity. Use vanity on level ground. Base vanity
supports a maximum weight of 200 lbs. Exceeding maximum
weight limit will compromise the integrity of the vanity structure
and could cause the vanity to fail.
CAUTION
Do not hang from the vanity.
Do not remove the vanity top to avoid damaging the vanity.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 50 minutes
Tools Required (not included): Silicone compound, Phillips screwdriver.
PART
DESCRIPTION
A
Vanity Top
B
Vanity Base
C
Backsplash
D
Sliding Door Set Left
E
Sliding Door Set Right
Maximum load 200 lb. (90.71 kg)
Maximum load 30 lb. (13.6 kg)
2
ASSEMBLY INSTRUCTIONS
Water Supply Lines and Drain Installation Guide
QUANTITY
1. Mark wall for vanity placement and note the location of the water supply
lines and drain on the back panel of vanity.
1
1
1
1
1
2. Move vanity base (B) into proper place against the wall.
3. Install faucet, drain and supply lines (none included) to vanity top (A)
according to the instructions supplied with those items.
1
2
3
3
B
A